Every file here is free to download, and you can add your own logo.

Free 3D Printed Place Cards With Guest Names

Each guest’s name in flowing script on a slim body that stays upright by itself at the table. It prints flat with one swap, and a whole guest list fits in one set.

Loading…

About the Place Card Name

Set one at every plate for a reception, a shower, or a holiday table, and nobody hunts for their seat. The name sits on a thick body with a flat foot, so it stays upright without a folded card or a little holder. Guests often take theirs home.

Examples

As it starts, then a few other ways it can look.

  • Place Card Name as it starts
  • Place Card Name, example 1
  • Place Card Name, example 2, with a logo beside the name
  • Place Card Name, example 3, with a logo beside the name
  • Place Card Name, example 4
  • Place Card Name, example 5, with a logo beside the name

At a glance

Letter height:
10–30 mm
Name:
up to 16 characters, in 31 fonts
Colors:
Body; letters; logo (a third, with a filament changer)
Per download:
up to 150 names
Prints:
flat, then stands up

As it starts

For “Ellie” with 14 mm letters, before you change anything. The numbers under the preview follow your name, letter height, and font.

Size:
35.2 × 18.8 × 8.4 mm
Color change at:
7 mm
Filament:
under 6 g PLA

Ideas for it

  • Paste the whole seating chart into the set, one guest per line, and print the table in batches.
  • Gold letters on a white body for a classic reception, or swap to the couple’s colors.
  • A small heart above or beside each name, shared across every card in the set.
  • Family names for Thanksgiving or Christmas dinner, kept in a drawer and brought out each year.

Printing the Place Card Name

Each card prints lying on its back and is stood up once it comes off the bed. The thick body is what gives it a steady footing, and the bottom edge is filled in flat under the letters, so a g or a y still sits level.

The body is drawn as one piece around the script, so every letter stays attached, but very small sizes lose detail. At 0.2 mm layers a moderate size reads well; go finer for crisper curls.

Every card in a set has the same thickness, so the color change lands at the same height on every plate. Add the pause once per plate and a full tray of names switches together.

One spool? Pause at the color change and swap by hand; your download gives the exact height.

Questions about the Place Card Name

Will it really stand up by itself?
Yes, on its flat bottom edge, on a level table. On a thick or uneven tablecloth, a thicker body is steadier.
Can I put a first and last name on it?
It takes one line, with room for a first name or a short first and last name. Long names make a longer card rather than a squashed one.
Do all the cards in a set match?
They share the same font, colors, and logo. Only the name changes.

Downloading it

Free once you sign in with Google, in files for 22 printers or any slicer. Downloads and files.