Every file here is free to download, and you can add your own logo.

Free Halloween Pumpkin Name Tag STL

A pumpkin-shaped tag for a candy bucket or treat bag, the name across its middle and a loop up on the stem. Its ridges and stem print in the letters’ color.

Loading…

About the Pumpkin Name Tag

A pumpkin tag hangs on a trick-or-treat bucket, a treat bag, or a costume bag, so kids at a party or a trunk-or-treat know which pail is theirs. The loop sits up on the stem, so the tag hangs upright from a handle. Classrooms and party hosts make one for every child.

Examples

As it starts, then a few other ways it can look.

  • Pumpkin Name Tag as it starts
  • Pumpkin Name Tag, example 1
  • Pumpkin Name Tag, example 2, with a logo beside the name
  • Pumpkin Name Tag, example 3, with a logo and no name
  • Pumpkin Name Tag, example 4
  • Pumpkin Name Tag, example 5, with a logo beside the name

At a glance

Letter height:
10–40 mm
Name:
up to 12 characters on each of 2 lines, in 34 fonts
Colors:
Pumpkin; letters, rim, creases, and stem; logo (a third, with a filament changer)
Per download:
up to 20 names
Prints:
flat, face up

As it starts

For “Ellie” with 14 mm letters, before you change anything. The numbers under the preview follow your name, letter height, and font.

Size:
61.3 × 58.5 × 3.8 mm
Color change at:
2.6 mm
Filament:
under 9 g PLA

Ideas for it

  • Bucket tags for siblings, so nobody argues over whose candy is whose
  • A bat or ghost icon above the name
  • Halloween birthday party favors with each guest’s name
  • A name on one line and the year on the next, saved as a keepsake
  • Glow-in-the-dark letters on orange, easy to spot after sundown

Printing the Pumpkin Name Tag

Start with orange for the pumpkin and switch to a dark color. That second color picks up the letters, the rim around the outside, the creases that divide the pumpkin into segments, and the stem with its loop.

The creases are slim raised lines, so check the preview in your slicer before printing. If any go missing, turn on your slicer’s thin-wall detection and slice again.

A tag that dangles from a bucket gets swung, dropped, and stepped on, so set the base toward the sturdy end. PLA is fine for one night of trick-or-treating; PETG takes rough handling better if you want it to last for years.

One spool? Pause at the color change and swap by hand; your download gives the exact height.

Questions about the Pumpkin Name Tag

Can I add a year under the name?
Yes, the pumpkin takes up to two lines, so a year or a class name fits below. Short words keep the letters bigger.
How do I attach it to a candy bucket?
Run a split ring, a ribbon, a zip tie, or a loop of cord through the hole in the stem and around the bucket’s handle.
Can a whole class get one?
Put the other children’s names under Make a set, one per line, and they arrive together, packed onto as few plates as possible. Pumpkin sets hold fewer names than keychain sets, so a very large group may need two downloads.

Downloading it

Free once you sign in with Google, in files for 22 printers or any slicer. Downloads and files.