Every file here is free to download, and you can add your own logo.

Free Personalized Christmas Ornament STL

A round bauble with a name across the front, room for a year or a short second line, and a cap with a loop for the hook. Two colors with one filament swap.

Loading…

About the Christmas Ornament

This is the classic round bauble, the shape most people picture when they think of a tree ornament. It suits a first ornament for a new home, a stocking stuffer, or a row of matching names for everyone who gathers on Christmas morning.

Examples

As it starts, then a few other ways it can look.

  • Christmas Ornament as it starts
  • Christmas Ornament, example 1
  • Christmas Ornament, example 2, with a logo beside the name
  • Christmas Ornament, example 3, with a logo and no name
  • Christmas Ornament, example 4
  • Christmas Ornament, example 5, with a logo beside the name

At a glance

Letter height:
10–40 mm
Name:
up to 12 characters on each of 2 lines, in 34 fonts
Colors:
Ornament; letters, rim, and cap; logo (a third, with a filament changer)
Per download:
up to 20 names
Prints:
flat, face up

As it starts

For “Ellie” with 16 mm letters, before you change anything. The numbers under the preview follow your name, letter height, and font.

Size:
51.3 × 67.9 × 3.8 mm
Color change at:
2.6 mm
Filament:
under 9 g PLA

Ideas for it

  • A matching set for every grandchild, each in their favorite color
  • The name on top and the year underneath, so the tree becomes a timeline
  • Red with gold letters for tradition, or white with silver for a frosty look
  • A snowflake icon above the name

Printing the Christmas Ornament

The bauble prints flat on its back, so there are no overhangs and nothing to support. The whole outline, cap and loop included, goes down in the first color, and the cap, rim, and letters rise on top of it in the second.

Script fonts like Yellowtail have fine joins between the letters. Layers of 0.2 mm or finer and a slightly slower outer wall keep those joins crisp. A silk gold or silver for the second color catches the tree lights.

By the time the printer stops for the swap, only the raised layers are left, so a failed swap costs very little.

One spool? Pause at the color change and swap by hand; your download gives the exact height.

Questions about the Christmas Ornament

Can I put the year on it?
Yes. The name box takes two lines, so type the name on the first and the year, or a short word like “Noel”, on the second. Both lines share the same font and color.
Will a regular ornament hook fit the loop?
Yes. The loop above the cap takes a standard wire hook or a narrow ribbon.
Will it hold up from one year to the next?
PLA is fine for an ornament that lives on a tree and then in a box. Keep it out of a hot attic or a parked car in summer, where PLA can soften and warp. PETG handles heat better if that’s a worry.

Downloading it

Free once you sign in with Google, in files for 22 printers or any slicer. Downloads and files.