Every file here is free to download, and you can add your own logo.

Free Band Spirit Stick Sign With a Name

A script name with music notes or an instrument above it, on a base cut to the letters. Two sign holders on the back snap it onto a dowel between two pom-poms.

Loading…

About the Band Spirit Stick

The name sign that rides on a band spirit stick, with music notes, a trumpet, or a snare drum above a name in script. Band parents wave them in the stands at football games and competitions, and sections hand them out before the last home show or on senior night. It is the same build as our cheer spirit stick, with band icons in place of a squad logo.

Examples

As it starts, then a few other ways it can look.

  • Band Spirit Stick as it starts
  • Band Spirit Stick, example 1
  • Band Spirit Stick, example 2, with a logo beside the name
  • Band Spirit Stick, example 3, with a logo beside the name
  • Band Spirit Stick, example 4
  • Band Spirit Stick, example 5, with a logo beside the name

At a glance

Letter height:
15–120 mm
Name:
up to 14 characters on each of 2 lines, in 37 fonts
Colors:
Base; letters; logo (a third, with a filament changer)
Per download:
up to 31 names
Prints:
flat, face up

As it starts

For “Zoe” with 30 mm letters, before you change anything. The numbers under the preview follow your name, letter height, and font.

Size:
67 × 39.6 × 5.5 mm
Color change at:
3 mm
Filament:
under 10 g PLA

Ideas for it

  • Music notes on every sign, in the school’s two colors.
  • A trumpet for the brass and a snare drum for the drumline.
  • The marcher’s name on top and “Drum Major,” “Section Leader,” or a number below.
  • The band’s own logo uploaded in place of an icon.
  • Senior night gifts with the class year as the second line.

It goes together just like our cheer spirit stick, with a pom-pom at each end of the dowel. Watch how it’s built.

Printing the Band Spirit Stick

It prints flat and face up, without supports. The base goes down in the first color, then one change brings in the letters and the icon together, so a navy and gold sign takes a single swap.

Script letters touch one another and the icon sits on a bridge of base, so every sign comes off the bed in one piece. The trumpet’s valves and the drum’s slots are the finest details; if they close up over a short name, raise the logo size a step.

A sign that gets waved all game wants a stiffer base. Three millimeters suits most names; a long name or two lines does better a step thicker.

One spool? Pause at the color change and swap by hand; your download gives the exact height.

Questions about the Band Spirit Stick

What else goes into the stick?
A half-inch wooden dowel, two pom-poms, two short zip ties to hold the poms on the ends, and a dab of super glue for each sign holder. The holders are a free download too.
How many sign holders does one sign need?
Two, glued toward each end of the name with their rings in a line. A very short name like “Jo” makes a narrow sign that only needs one, in the middle.
Can I make one for the whole band at once?
Yes. Open Make a set and paste the roster, and every name comes in a single download, laid out on as few beds as your printer allows.

Downloading it

Free once you sign in with Google, in files for 22 printers or any slicer. Downloads and files.