Every file here is free to download, and you can add your own logo.

Free Color Guard Spirit Stick Sign With a Name

Two crossed guard flags over a name in script, joined to a base that follows the outline. Snap it onto a dowel with a pair of sign holders and add pom-poms.

Loading…

About the Color Guard Spirit Stick

A spirit stick sign for the color guard: two crossed flags over the spinner’s name, cut out around the letters. Families hold them up when the guard takes the field, and captains give them out at band camp or before the final competition. Winter guard teams bring them to the gym bleachers too.

Examples

As it starts, then a few other ways it can look.

  • Color Guard Spirit Stick as it starts
  • Color Guard Spirit Stick, example 1
  • Color Guard Spirit Stick, example 2, with a logo beside the name
  • Color Guard Spirit Stick, example 3, with a logo beside the name
  • Color Guard Spirit Stick, example 4
  • Color Guard Spirit Stick, example 5, with a logo beside the name

At a glance

Letter height:
15–120 mm
Name:
up to 14 characters on each of 2 lines, in 37 fonts
Colors:
Base; letters; logo (a third, with a filament changer)
Per download:
up to 31 names
Prints:
flat, face up

As it starts

For “Lucy” with 30 mm letters, before you change anything. The numbers under the preview follow your name, letter height, and font.

Size:
78.3 × 55.1 × 5.5 mm
Color change at:
3 mm
Filament:
under 12 g PLA

Ideas for it

  • The guard’s show colors for the season instead of the school colors.
  • “Flag,” “Rifle,” “Sabre,” or “Captain” on the line under the name.
  • The single flag icon in place of the crossed pair, for a slimmer sign.
  • Senior night signs with the graduating year under each name.
  • A matching sign for each instructor, with “Tech” or “Staff” below.

Want to see a finished stick? Our cheer guide clips the same kind of sign onto a dowel between two pom-poms. Watch the spirit stick build.

Printing the Color Guard Spirit Stick

The two poles cross low on the icon and lean apart, so the flags spread wide over the letters. On a short name the flags can be wider than the name itself, and the base grows to hold both as one solid piece.

White letters on a purple base is the starting look. At the color change, purge longer than usual, until the white comes through with no purple streaks, before the print carries on.

Each sign lies flat on the bed and needs no supports. A matte filament hides layer lines across the flags, and silver or gold letters read well from the stands.

One spool? Pause at the color change and swap by hand; your download gives the exact height.

Questions about the Color Guard Spirit Stick

What holds the sign on the dowel?
Two printed sign holders, glued to the back near each end of the name. They snap around a 1/2 inch dowel and grip it tightly enough to wave. You’ll find them free on the mounting page.
Can I use our show logo instead of the flags?
Yes. Upload the logo, or choose another built-in icon such as the single flag or the music notes.
Can I make the whole guard at once?
Yes. Paste every member’s name into Make a set and all the signs arrive together, packed onto your printer’s bed.

Downloading it

Free once you sign in with Google, in files for 22 printers or any slicer. Downloads and files.