Free 3D Printed Door Name Sign
A rounded plate with a name, plus two screw holes up top so it mounts flat on a door. A logo or icon is optional; two colors, one swap.
Loading…
About the Door Sign
A door sign is made to be screwed in place: a rounded plate with two screw holes in its top corners, for a bedroom, a classroom, an office, or a dorm. The letters keep clear of the holes, so screw heads never cover the name. A room name or a short phrase works as well as a person’s name.
Examples
As it starts, then a few other ways it can look.
At a glance
- Letter height:
- 10–150 mm
- Name:
- up to 20 characters on each of 2 lines, in 25 fonts
- Colors:
- Base; letters; logo (a third, with a filament changer)
- Per download:
- up to 31 names
- Prints:
- flat, face up
As it starts
For “Ellie's Room” with 25 mm letters, before you change anything. The numbers under the preview follow your name, letter height, and font.
- Size:
- 185.7 × 43.6 × 4.2 mm
- Color change at:
- 3 mm
- Filament:
- under 33 g PLA
Ideas for it
- “Olivia’s Room” for a kid’s bedroom door
- A teacher’s name over the room number on a classroom door
- A meeting room or office label
- Roommates’ names on two lines for a dorm door
- A craft room or studio sign with a logo beside it
Printing the Door Sign
There’s no border here, so the plate stays clean and the name stands alone in color two. The plate is long and flat, which makes a good first layer the main thing to get right: a level, clean bed and a glue stick or brim hold the corners down.
The holes take a small wood screw. Tighten by hand and stop once the plate is snug, because overtightening can crack the plastic around a hole. On a hollow-core door or drywall, use anchors.
A thicker base flexes less when you drive the screws, so lean toward the sturdier setting for a door that gets slammed.
One spool? Pause at the color change and swap by hand; your download gives the exact height.
Questions about the Door Sign
- Can I mount it without screws?
- Double-sided mounting tape or removable adhesive strips on the back hold it to most painted doors and leave no holes. Wipe the door clean first so the tape grips.
- Can it go on an outside door?
- PLA can soften and bend in direct sun, especially on a dark door. For an exterior door, print it in PETG or ASA.
- What if the name is long?
- It can wrap onto a second line, and the plate grows wider to fit. Size only goes as big as your bed allows, so on a small printer a long phrase reads better split over two lines.
Downloading it
Free once you sign in with Google, in files for 22 printers or any slicer. Downloads and files.